Wuji Xinhui Chemical Co., Ltd.
Main products:SLES
Products
Contact Us
  • Contact Person : Mr. Li Evan
  • Company Name : Wuji Xinhui Chemical Co., Ltd.
  • Tel : 86-311-85587276
  • Fax : 86-311-85747702
  • Address : Hebei,Shijiazhuang,No2 Xinghua Lane Hutaiying Village Wuji County
  • Country/Region : China
  • Zip : 052460

Phenolic resin for casting

Phenolic resin for casting
Product Detailed
1. Phenolic resin for casting / foundry 2. Phenol formaldehyde resin 3. CAS No.: 9003-35-4 4. Free samples

Phenolic resin

Phenolic resins are a two part Estercured phenolic binder system that uses an alkaline phenolic resin.   The ester coreactant controls the cure rate. 

It is a brownred transparent liquid with the following characteristics:

1. The system contains no Nitrogen, Sulphur, or Phosphorous reducing the potential for casting porosity defects.

2. The organic ester hardening systems high temperature thermoplastic and secondary cure further cross-links the polymer reducing hot cracking and veining of steel and ductile iron castings

3. The process does not generate harmful, irritating, or noxious odors, significantly improving the work environment.

4. Good collapsibility reduces workload for cleaning and improves work efficiency.

SPECIFICATION

Phenolic resin

Item

Standard

Appearance

Brown red liquid

Viscosity, 25°C

≤ 150 MPa.S

Free Formaldehyde

≤ 0.3%

Density, g/cm3 20°C

1.25± 0.05

PH Value

≥ 12

Shelf life, ≤25°C

12 month

Application

Steel castings, ductile casting and

 non-ferrous casting

a. Mixing Proportion

Sand                              100

Resin                             1.52.0% of sand weight

Hardener                        20%--30% of resin weight

b. Mixing Process

Mix sand with hardener, and then add resin. Normally the mixing time is 5 to 60 seconds.

CAUTIONS

a. The resins are highly alkaline, and normal precautions for handling chemicals should be used. As with all chemicals, protective clothing, chemical resistant gloves and facemasks should be used.    

b. Resin drums should be stored sealed. If hardener comes in contact with skin, wash immediately with large quantity of clean water.

c. Resin should be kept in cold and dry place out of direct sunlight. Handle cautiously.

Phenolic resin for casting



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.